Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
esp32:esp32_main [2020/10/13 19:46]
admin [Espressif ESP32 Development Board] 		esp32:esp32_main [2020/11/17 15:49]
admin [DAC and ADC]
Line 34: Line 34:
 ---- ----
 === Special Hardware Configuration ==== === Special Hardware Configuration ====
-The build in LED is on Pin 2.\\ + 
-Pin 34 and 35 are input only.\\ +** The I/O pins are not 5V-tolerant! **\\ 
-Pin 34 - 39 don't have a software pullup/down functions. One has to use an external 10k pullup resistor.\\+Use 3.3V instead.\\ 
 +\\ 
 +The build in LED is on GPIO 2.\\ 
 +\\ 
 +GPIO 34, 35, 36, 37, 38 and 39 are input only. And don't have a software pull-up or pull-down functions. One has to use an external 10k pull-up resistor.\\ 
 +\\ 
 +GPIO 6, 7, 8, 9, 10 and 11 are used for the SPI flash chip and can't be used  for any other purposes.\\
  
 ---- ----
Line 105: Line 111:
 [[https://www.adafruit.com/product/3405|Adafruit HUZZAH32 – ESP32 Feather Board]]\\ [[https://www.adafruit.com/product/3405|Adafruit HUZZAH32 – ESP32 Feather Board]]\\
 [[https://learn.adafruit.com/adafruit-huzzah32-esp32-feather|Adafruit Learn Guid]]\\ [[https://learn.adafruit.com/adafruit-huzzah32-esp32-feather|Adafruit Learn Guid]]\\
 +
 +----
 +===== DAC and ADC =====
 +
 +**ADC**\\
 +
 +
 +[[https://www.malabdali.com/esp32-adc-and-dac/]]
 +
 +**DAC**\\
 +The ESP32 has two DAC pins, GPIO25 and GPIO26. The resolution is 8 bits.\\
 +   dacWrite(25, Value); // 255=3.3V 128=1.65V 0=0.0V
 +For generating a sine wave one finds a good manual here: [[https://www.xtronical.com/basics/audio/dacs-on-esp32/|DAC’s on ESP32]]\\
 +
 ---- ----