This is an old revision of the document!
Table of Contents
Arduino and Firmata
Install the Arduino IDE:
$ sudo apt install arduino
Open the Arduino IDE as administrator:
$ sudo arduino
Select in → Tools → Board and Port. The port looks something like: /dev/ttyUSB0
Open the Firmata program: → open → Firmata → StandardFirmata
And upload it!
Pduino
A workaround for controlling an Arduino in Pure Data on a Raspberry Pi Raspbian Buster:
Pure Data and Pduino
Install Pure Data
$ sudo apt update $ sudo apt install puredata
Install the Externals
The comport external should be installed via the terminal:
$ sudo apt install pd-comport
The other externals can be installed in Pure Data. Open Pure Data and in:
→ Help → Find Externals
Install: zexy, mapping, cyclone and pduino
The Pd external folder should look like that:
Set Path
In Pure Data → Preferences → Path set the paths for the zexy, mapping, cyclone and pduino libraries.
It might be /home/pi/pd/externals/….