This is an old revision of the document!


Audio Stream

Streaming audio over internet using icecast and darkice on RaspbianStretch.
update:

$ sudo apt-get update

install icecast2 and darkice:

$ sudo apt-get install icecast2 darkice

if asked type in hostname and password

hostname: localhost
password: ????

change config:

$ sudo nano /etc/darkice.cfg

to:

# this section describes general aspects of the live streaming session [general] duration = 0 # duration of encoding, in seconds. 0 means forever bufferSecs = 2 # size of internal slip buffer, in seconds reconnect = yes # reconnect to the server(s) if disconnected # this section describes the audio input that will be streamed [input] device = hw:1,0 # Alsa soundcard device for the audio input sampleRate = 48000 # sample rate in Hz. try 48000, 96000 or 192000 bitsPerSample = 16 # bits per sample. try 16 channel = 2 # channels. 1 = mono, 2 = stereo.

                               # Only stereo mode is supported by pisound.  

# this section describes a streaming connection to an IceCast2 server # there may be up to 8 of these sections, named [icecast2-0] … [icecast2-7] # these can be mixed with [icecast-x] and [shoutcast-x] sections [icecast2-0] bitrateMode = cbr # variable bit rate bitrate = 128 format = mp3 # format of the stream: mp3 quality = 0.8 # quality of the stream sent to the server server = localhost # host name of the server port = 8000 # port of the IceCast2 server, usually 8000 password = hackme # source password to the IceCast2 server mountPoint = pisound # mount point of this stream on the IceCast2 server name = pisound # name of the stream description = DarkIce on pisound # description of the stream url = http://localhost # URL related to the stream genre = my genre # genre of the stream public = no # advertise this stream? #localDumpFile = recording.mp3 # Record also to a file


[general] duration = 0 # duration in s, 0 forever bufferSecs = 1 # buffer, in seconds reconnect = yes # reconnect if disconnected

[input] device = plughw:1,0 # or `pulse' for Pulseaudio sampleRate = 22050 # sample rate 11025, 22050 or 44100 bitsPerSample = 16 # bits channel = 1 # 2 = stereo

[icecast2-0] bitrateMode = vbr # variable bit rate (`cbr' constant, `abr' average) quality = 1.0 # 1.0 is best quality format = mp3 # format. Choose `vorbis' for OGG Vorbis bitrate = 128 # bitrate server = 10.10.10.11 # IP address of the IceCast server port = 8000 # port for IceCast2 access password = ** # source password to the IceCast2 server mountPoint = radio.mp3 # mount point on the IceCast2 server .mp3 or .ogg name = radio

run:

$ darkice