Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
raspberry:zero_over_usb [2020/03/05 19:08]
admin
raspberry:zero_over_usb [2020/03/05 19:09] (current)
admin
Line 2: Line 2:
  
 This is a manual for connecting a Raspberry Pi Zero to your computer via USB. This is a manual for connecting a Raspberry Pi Zero to your computer via USB.
-After burning the image on your SD card one has to add the USB driver on startup. To change the Design Ware Core to 2 write in /boot/config.txt at the end of the text:+After burning the image on your SD card one has to add the USB driver on startup. To change the DesignWare Core to 2 write in /boot/config.txt at the end of the text:
     dtoverlay=dwc2     dtoverlay=dwc2
 and in /boot/cmdline.txt add after rootwait: and in /boot/cmdline.txt add after rootwait: