Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
samd21:bootloader [2020/12/30 18:57]
admin [Bootloader] 		samd21:bootloader [2020/12/30 21:15]
admin [... with a Segger J-Link Programmer]
Line 5: Line 5:
 ==== ... with a Raspberry Pi ==== ==== ... with a Raspberry Pi ====
  
-One has to install OpenOCD on a Raspberry Pi:\\+One has to install OpenOCD on a Raspberry Pi (RaspbianBuster):\\
 Update and install some tools: Update and install some tools:
-  sudo apt-get update +  $ sudo apt-get update 
-  sudo apt-get install git autoconf libtool make pkg-config libusb-1.0-0 libusb-1.0-0-dev htop+  § sudo apt-get install git autoconf libtool make pkg-config libusb-1.0-0 libusb-1.0-0-dev htop
 Download OpenOCD from [[http://openocd.zylin.com/#/admin/projects/openocd]]: Download OpenOCD from [[http://openocd.zylin.com/#/admin/projects/openocd]]:
-  git clone http://openocd.zylin.com/openocd+  $ git clone http://openocd.zylin.com/openocd
 Compile: Compile:
-  cd openocd-code +  $ cd openocd-code 
-  ./bootstrap +  $ ./bootstrap 
-  ./configure --enable-sysfsgpio --enable-bcm2835gpio +  $ ./configure --enable-sysfsgpio --enable-bcm2835gpio 
-  make +  $ make 
-  sudo make install +  $ sudo make install 
-List of Interfaces: +List all Interfaces: 
-  cd /usr/local/share/openocd/scripts/interface +  $ cd /usr/local/share/openocd/scripts/interface 
-  ls +  $ ls 
-Downloading the Bootloader: +Make a Folder and Download the Bootloader: 
-  cd ~ +  $ cd ~ 
-  mkdir bootloader +  $ mkdir bootloader 
-  cd bootloader +  $ cd bootloader 
-  wget https://github.com/arduino/ArduinoCore-samd/raw/master/bootloaders/zero/samd21_sam_ba.bin +  $ wget https://github.com/arduino/ArduinoCore-samd/raw/master/bootloaders/zero/samd21_sam_ba.bin
-  wget https://github.com/Seeed-Studio/ArduinoCore-samd/blob/master/bootloaders/XIAOM0/bootloader-XIAO_m0-v3.7.0-33-g90ff611-dirty.bin+
 Make a Configuration File: Make a Configuration File:
-  nano openocd.cfg+  $ nano openocd.cfg
 and add: and add:
   source [find interface/raspberrypi2-native.cfg]   source [find interface/raspberrypi2-native.cfg]
Line 47: Line 46:
   targets   targets
   reset halt   reset halt
 +  
 +  t91samd bootloader 0
 +  program samd21_sam_ba.bin verify
 +  at91samd bootloader 8192
 +  reset
 +  shutdown
 +
 +The GPIO pin numbers can be set here or in the raspberrypi2-native.cfg file. To do so change in:
 +  $ sudo nano /usr/local/share/openocd/scripts/interface/raspberrypi2-native.cfg
 +the following lines:
 +  bcm2835gpio_swd_nums 25 24
 +  bcm2835gpio_trst_num 7
 +  bcm2835gpio_srst_num 18
 +
 Connecting the SAMD21 Board: Connecting the SAMD21 Board:
    RasPi-GPIO  SAMD21    RasPi-GPIO  SAMD21
Line 58: Line 71:
  
 ==== ... with a Segger J-Link Programmer ==== ==== ... with a Segger J-Link Programmer ====
 +UNDER CONSTRUCTION
  
 and [[https://github.com/adafruit/Adafruit_Adalink|Adalink ARM CPU Tool]]\\ and [[https://github.com/adafruit/Adafruit_Adalink|Adalink ARM CPU Tool]]\\
Line 75: Line 89:
  
 [[https://github.com/Seeed-Studio/ArduinoCore-samd/blob/master/bootloaders/XIAOM0/update-bootloader-XIAO_m0-v3.7.0-33-g90ff611-dirty.bin|Seeeduino XIAO Bootloader]]\\ [[https://github.com/Seeed-Studio/ArduinoCore-samd/blob/master/bootloaders/XIAOM0/update-bootloader-XIAO_m0-v3.7.0-33-g90ff611-dirty.bin|Seeeduino XIAO Bootloader]]\\
 +This bootloader bever worked for me!\\
  
 ---- ----
Line 80: Line 95:
  
 [[https://learn.adafruit.com/programming-microcontrollers-using-openocd-on-raspberry-pi/compiling-openocd|Programming Microcontrollers using OpenOCD on a Raspberry Pi by Lady Ada]]\\ [[https://learn.adafruit.com/programming-microcontrollers-using-openocd-on-raspberry-pi/compiling-openocd|Programming Microcontrollers using OpenOCD on a Raspberry Pi by Lady Ada]]\\
 +
 +[[https://embeddedcomputing.weebly.com/seeeduino-xiao-m0.html|Seeeduino Xiao M0​ by Embedded Computing]]\\
  
 [[https://forum.seeedstudio.com/t/how-to-unbrick-a-dead-xiao-using-raspberry-pi-guide-openocd/253990|How to Unbrick a Dead XIAO Using Raspberry Pi by John Doe]]\\ [[https://forum.seeedstudio.com/t/how-to-unbrick-a-dead-xiao-using-raspberry-pi-guide-openocd/253990|How to Unbrick a Dead XIAO Using Raspberry Pi by John Doe]]\\
 +
 +[[http://openocd.org/doc/html/Flash-Commands.html|OpenOCD - Flash Commands]]\\
  
 ---- ----