Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
samd21:bootloader [2020/12/30 19:26]
admin [Bootloader] 		samd21:bootloader [2020/12/30 21:15] (current)
admin [... with a Segger J-Link Programmer]
Line 71: Line 71:
  
 ==== ... with a Segger J-Link Programmer ==== ==== ... with a Segger J-Link Programmer ====
 +**UNDER CONSTRUCTION !**
  
 and [[https://github.com/adafruit/Adafruit_Adalink|Adalink ARM CPU Tool]]\\ and [[https://github.com/adafruit/Adafruit_Adalink|Adalink ARM CPU Tool]]\\
Line 94: Line 95:
  
 [[https://learn.adafruit.com/programming-microcontrollers-using-openocd-on-raspberry-pi/compiling-openocd|Programming Microcontrollers using OpenOCD on a Raspberry Pi by Lady Ada]]\\ [[https://learn.adafruit.com/programming-microcontrollers-using-openocd-on-raspberry-pi/compiling-openocd|Programming Microcontrollers using OpenOCD on a Raspberry Pi by Lady Ada]]\\
 +
 +[[https://embeddedcomputing.weebly.com/seeeduino-xiao-m0.html|Seeeduino Xiao M0​ by Embedded Computing]]\\
  
 [[https://forum.seeedstudio.com/t/how-to-unbrick-a-dead-xiao-using-raspberry-pi-guide-openocd/253990|How to Unbrick a Dead XIAO Using Raspberry Pi by John Doe]]\\ [[https://forum.seeedstudio.com/t/how-to-unbrick-a-dead-xiao-using-raspberry-pi-guide-openocd/253990|How to Unbrick a Dead XIAO Using Raspberry Pi by John Doe]]\\
 +
 +[[http://openocd.org/doc/html/Flash-Commands.html|OpenOCD - Flash Commands]]\\
  
 ---- ----